Professor Seidmann
Abraham Seidmann
Xerox Professor
  • Electronic Commerce
  • Computers and Information Systems
  • Operations Management

Research

Scientific Publications

  1. A. Seidmann and M.L. Smith, "Due-Date Assignment for Production Systems," Management Science, Vol. 27, No. 5, (1981), pp. 571-581.
  2. A. Seidmann, S. S. Panwalkar and ML Smith, "Optimal Assignment of Due-Dates for a Single Processor Scheduling Problem," International Journal of Production Research, Vol. 19, No. 4, (1981), pp. 393-399.
  3. S. S. Panwalkar, ML Smith and A. Seidmann, "Common Due-Date Assignment to Minimize Total Penalty for the One Machine Scheduling Problem," Operations Research, Vol. 30, No. 2,( 1982), pp. 391-399.
  4. M. L. Smith and A. Seidmann, "Due-Date Selection Procedures for Job-Shop Simulation Systems," Computers and Industrial Engineering, Vol. 7, No. 3, (1983), pp. 199-207.
  5. A. Seidmann and A. Arbel, "An Analytic Approach for Planning Computerized Office Systems," Omega , Vol. 11, No. 6, (1983), pp. 607-617.
  6. A. Arbel and A. Seidmann, "Selecting a Microcomputer For Process Control and Data Acquisition", IIE Transactions, Vol. 16, No. 1,( 1984), pp. 73-80.
  7. A. Arbel and A. Seidmann, "Performance Evaluation of Flexible Manufacturing Systems," IEEE Transactions on Systems, Man and Cybernetics, Vol. 14, No. 4, (1984 ), pp. 606-617.
  8. P. J. Schweitzer and A. Seidmann, "Generalized Polynomial Approximations in Markovian Decision Processes," Journal of Mathematical Analysis and Applications, Vol. 110, No. 6, (1985), pp. 568-582.
  9. A. Seidmann, A. Arbel and R. Shapira, "A Two-Phase Analytic Approach to Robotic System Design," Robotics & Computer Integrated Manufacturing, Vol. 2, No. 2, (1984), pp. 181-190.
  10. A. L. Stoecker, A. Seidmann and G. L. Lloyd, "A Linear Dynamic Programming Approach to Irrigation System Management With Depleting Ground Water," Management Science, Vol. 31, No. 4, (1985), pp. 422-434.
  11. A. Seidmann and P. J. Schweitzer, "Part Selection Policy for a Flexible Manufacturing Cell Feeding Several Production Lines," IIE Transactions, Vol. 16, No. 4, (1984), pp. 355-362.
  12. A. Seidmann and A. Arbel, "Microcomputer Selection Process for Organizational Information Management," Information & Management, Vol. 7, No. 4, (1984), pp. 317-329.
  13. A. Seidmann, P. J. Schweitzer and S. Y. Nof, "Performance Evaluation of a Flexible Manufacturing Cell with Random Multiproduct Feedback Flow," International Journal of Production Research , Vol. 23, No. 6, (1985), pp. 1171-1184.
  14. R. Wilhelm, S. Y. Nof and A. Seidmann, "Analysis of Recirculation in Robotic Systems Using Feedback Models," Material Flow, Vol. 3, No. 1, (1986), pp. 69-82.
  15. E. L. Fisher, S. Y. Nof and A. Seidmann, "Robot Systems Analysis: Basic Concepts and Survey of Methods, paper in "Robotics and Industrial Engineering: Selected Readings," E. L. Fisher (Ed.),Institute of Industrial Engineering (IIE) Publications, Atlanta, GA, (1983), pp. 77-87.
  16. S. Shalev-Oren, A. Seidmann and P. J. Schweitzer, "Analysis of Flexible Manufacturing Systems with Priority Scheduling: PMVA," Annals of Operational Research, Vol. 6, (1985), pp. 115-139.
  17. A. Seidmann and S. Y. Nof, "Unitary Manufacturing Cell Design with Random Product Feedback Flow," IIE Transactions, Vol. 17, No. 2, (1985) pp. 188-193.
  18. A. Arbel and A. Seidmann, "Capacity Planning, Benchmarking and Evaluation of Small Computer Systems," European Journal of Operational Research , Vol. 22, No. 6, (1985) pp. 347-358.
  19. P. J. Schweitzer, A. Seidmann and S. Shalev-Oren, "The Correction Term in Approximate Mean Value Analysis," Operations Research Letters , Vol. 4, No. 5, (1986), pp. 197-200.
  20. A. Arbel and A. Seidmann, "Designing a Multi-Micro Distributed Accounting Information System," Human Systems Management, Vol. 5, No. 4, (1985), pp. 283-291.
  21. A. Seidmann, P. J. Schweitzer and S. Y. Nof, "Observations on the Normality of Batch Production Times in Flexible Manufacturing Systems," International Journal of Production Research , Vol. 25, No. 1, (1987), pp. 151-154.
  22. A. Seidmann, "On-Line Scheduling of a Robotic Manufacturing Cell with Stochastic Sequence-Dependent Processing Rates," International Journal of Production Research , Vol. 25, No. 6, (1987), pp. 907-924.
  23. A. Seidmann, P. J. Schweitzer and S. Shalev-Oren, "Computerized Closed Queueing Network Models of Flexible Manufacturing Systems," Large Scale Systems, Vol. 12, No. 4, (1987), pp. 91-107.
  24. A. Seidmann, "Optimal Dynamic Routing in Flexible Manufacturing Systems with Limited Buffers," Annals of Operations Research, Vol. 15, pp. 291-311 (1988).
  25. A. Seidmann, "Regenerative Pull (Kanban) Production Control Policies," European Journal of Operational Research, Vol. 35, No. 3, (1988), pp. 401-413.
  26. A. Seidmann, "Intelligent Control Schemes for Automated Storage and Retrieval Systems (AS/RS)," International Journal of Production Research, Vol. 26, No. 5, (1988), pp. 931-952.
  27. S. Globerson, and A. Seidmann, "The Effects of Imposed Learning Curves on Performance Improvements," IIE Transactions, Vol. 20, No. 3, pp. 317-324 (1988).
  28. A. Seidmann, and S. Y. Nof, "Operational Analysis of an Autonomous Assembly Robotic Station," IEEE Transactions on Robotics and Automation, Vol. 5, No. 1, (1989), pp. 4-15.
  29. A Seidmann, and S. Globerson, "Dynamic Pacing and Learning in Assembly Operations, " Journal of Manufacturing and Operations Management, Vol. 1, No. 2, (1988), pp. 202-226.
  30. J. N. Daigle, A. Seidmann, and J. R. Pimentel, "Communications for Manufacturing: An Overview," IEEE Networks, Vol. 2, No. 1, (1988), pp. 6-13.
  31. A. Seidmann, and A. Tenenbaum, "A Computational Approach to Optimal Queueing Systems Controls with Limited Buffers and with Multiple Component Cost Functions," IEEE Transactions on Systems, Man and Cybernetic s, Vol. 19, No. 2, (1989), pp. 356-364.
  32. J. Keilson, and A. Seidmann, "M/G/• with Batch Arrivals," Operations Research Letters, Vol. 7, No. 5, (1988), pp. 219-222.
  33. J. Kim, and A. Seidmann, "A Framework for the Exact Evaluation of Expected Cycle Times in Automated Storage Systems with Full-Turnover Item Allocation and Random Service Requests," Computers and Industrial Engineering, Vol. 18, No. 4, (1990) pp. 601-612.
  34. A. Tenenbaum, and A. Seidmann, "Dynamic Load Control Policies for a Flexible Manufacturing System with Stochastic Processing Rates," International Journal of Flexible Manufacturing Systems , Vol. 2, No. 2, (1989), pp. 93-120.
  35. P.J. Schweitzer, and A. Seidmann, "Optimizing Processing Rates for Flexible Manufacturing Systems," Management Science Vol. 37, No. 4, (1991), pp. 454-466.
  36. P. J. Schweitzer, A. Seidmann, and P. B. Goes, "Performance Management in Flexible Manufacturing Systems," International Journal of Flexible Manufacturing Systems Vol. 4, No. 1, (1991), pp. 17-50.
  37. B. Pourbabai, and A. Seidmann,"Routing and Buffer Allocation Models for a Telecommunication System with Heterogeneous Devices," European Journal of Operational Research Vol. 63, (1992), pp. 423-431.
  38. H. Groenevelt, L. Pintelon, and A. Seidmann,"Production Lot Sizing with Machine Breakdowns," Management Science Vol. 38, No. 1, (1992), pp. 104-123.
  39. A. E. Gray, U. S. Karmarkar, and A. Seidmann, "Design and Operations of an Order Consolidation Warehouse: Models and Application," European Journal of Operational Research Vol. 58, (1992), pp. 14-36.
  40. W. B. Richmond, A. Seidmann, and A. B. Whinston, "Incomplete Contracting Issues in Information Systems Development Outsourcing," Decision Support Systems, Vol. 8, No. 4, (1992), pp. 459-477.
  41. H. Groenevelt, L. Pintelon, and A. Seidmann, "Production Batching with Machine Breakdowns and Safety Stocks," Operations Research, Vol. 40, No. 5, (1992), pp. 959-971.
  42. A. Seidmann, and A. Tenenbaum, "Throughput Maximization of Flexible Manufacturing Systems," IIE Transactions, Vol. 26, No. 1, (1994), pp. 90-100.
  43. A. E. Gray, A. Seidmann, and K. E. Stecke, "A Synthesis of Decision Models for Tool Management in Automated Manufacturing," Management Science, Vol. 39, No. 5, (1993), pp. 549-567.
  44. W. B. Richmond, and A. Seidmann, "Software Development Outsourcing: Contract Structure and Business Value," Journal of Management Information Systems, Vol. 10, No. 1, (1993), pp. 57-72.
  45. H. S. Choi, A. Seidmann, and M. W. Suh, "Decision Models for Designing and Planning Private Communication Networks," Decision Support Systems, Vol. 15, No. 6, (1995), pp. 389-403.
  46. A. Seidmann, and E. Wang, "Electronic Data Interchange: Competitive Externalities and Strategic Implementation Policies," Management Science, Vol. 41, No. 3, (1995), 401-418.
  47. D. Dey, and A. Seidmann, "Benchmarking Decision Models for Database Management Systems," Information Systems Research , Vol. 5, No. 3, (1994), pp. 275-293.
  48. J. Kim, P. J. Schweitzer, and A. Seidmann "Analysis of Flexible Manufacturing Systems with Distinct Repeated Visits: DrQ," International Journal of Flexible Manufacturing Systems, Vol. 7, No. 4, (1995), pp. 319-338.
  49. J. Johansen, U. K. Karmarkar, D. Nanda, and A. Seidmann, "Computer Integrated Manufacturing: Empirical Implications for Industrial Information Systems," Journal of Management Information Systems, Vol. 12, No. 2, (1995), pp. 60-82.
  50. Hazra, J. and A. Seidmann, "Performance Evaluation of Closed Tree-Structured Assembly Systems," IIE Transactions Vol. 28, No. 7, (1996), pp 591-599.
  51. Nelson, P., W. Richmond, and A. Seidmann, "Software Acquisition: The Custom/Package and Insource/Outsource Dimensions," Communications of the ACM Vol. 39, No. 7, (1996), pp. 29-35.
  52. Wang, E. T. G., T. Barron, and A. Seidmann, "Contracting Structures for Custom Software Development: The Impact of Informational Rents and Uncertainty on Internal Development and Outsourcing," Management Science Vol. 43, No. 12, (1997), pp. 1726-1744.
  53. Seidmann, A. and A. Sundararajan, "The Effects of Asymmetry on Business Process Redesign," International Journal of Production Economics Vol. 50, (1997), PP 117-128.
  54. Dewan, R., A. Seidmann, and S. Sundaresan, "Communications in Hierarchical Organizations and IT Standards Policies," International Journal of Electronic Commerce Vol. 1, No. 3, (1997), pp. 43-63.
  55. M. J. Shaw, A. Seidmann, and A. B. Whinston, "Information Technology for Automated Manufacturing Enterprises: Recent Developments and Current Research Issues," International Journal of Flexible Manufacturing Systems Vol. 9, No. 2, (1997), pp. 115-120.
  56. A. Seidmann, and A. Sundararajan, "Competing in Information Intensive Services: Analyzing the Economic Impact of Task Consolidation and Employee Empowerment," Journal of Management Information Systems Vol. 14, No 2, (1997), pp. 33-56.
  57. Dewan, R. A., M. Freimer, and A. Seidmann, "Internet Service Providers, Proprietary Content, and the Battle for Users' Dollars," Communications of the ACM, Vol. 41, No. 8, (1998), pp. 43-48.
  58. Hazra, J., P. Schweitzer, and A. Seidmann "Analyzing Closed Kanban-Controlled Assembly Systems by Iterative Aggregation-Disaggregation," Computers and Operations Research, Vol. 26, No. 10/11, (1999), pp. 1015-1039.
  59. Dewan, R. A., M. Freimer, and A. Seidmann, "Organizing Distribution Channels for Information Goods on the Internet," Management Science , Vol. 46, No. 4, (2000), pp. 483 - 495.
  60. Dewan, R. A., M. Freimer, and A. Seidmann, "Adoption of Internet-Based Product Customization and Pricing Strategies," Journal of Management Information Systems, Vol. 17 No. 2, Fall 2000, pp. 9 - 28.
  61. Gundepudi, P., N. Rudi, and A., Seidmann, "Forward Versus Spot Buying of Information Goods," Journal of Management Information Systems, Vol. 18 No. 2, Fall 2000, pp. 107 - 131.
  62. Pinker, E., and A. Seidmann, "Strategies for Transitioning "Old Economy" Firms to E-Business," Communications of the ACM, (to appear).
  63. Dewan, R., and A. Seidmann, "Current Issues in E-Banking: Introduction," Communications of ACM, June 2001.
  64. Hazara, J., P. Schweitzer and A. Seidmann, "Throughput and Inventory Estimation of a Pull-Based Supply System" International Journal of Manufacturing Techonology and Management (To Appear.)
  65. Dewan, R. A., J. Bing, and A. Seidmann, "Product Customization and Price Competition on the Internet" Management Science, Vol. 49, No. 8, pp. 1055-1070, August 2003. It was among the SSRN's Top Ten download list for the journal/ topic "Computers and Information Technology" in 2002 and 2003.
  66. Dewan, R., J. Rummel, Z. Walter, and A. Seidmann Activity Consolidation to Improve Responsiveness, European Journal of Operations Research, Vol. 161, pp. 683-703, December 2005.
  67. Pinker E., Seidmann, A. and Y. Vakrat The Design of Online Auctions: Business Issues and Current Research Management Science, Vol. 49, Number 11, pp. 1457-1484, November 2003.
  68. Lexa, F. J., A. Seidmann, and T. Mehta, Managerial Accounting Applications in Radiology: A Critical Review and Analysis, Journal of the American College of Radiology, Vol. 2, Number 3, pp 262-270, March 2005.
  69. Dewan, R., L, M. Freimer, A. Seidmann, and J. Zhang, Web Portals: Evidence and Analysis of Media Concentration, Journal of Management Information Systems, Vol. 21 No. 2, pp. 181-199, 2004.
  70. Seidmann, A., and T. Mehta, Financial Accounting for Radiology Executives: Risk and Options," Journal of the American College of Radiology, Vol. 2, Number 3, pp232-240, March 2005.
  71. Etzion, H., Pinker E., Seidmann A., 2004. "Analyzing the Simultaneous Use of Auctions and Posted Prices for On-line Selling," Manufacturing Systems and Operations Management MSOM, Vol. 8 Number 1, pp 68-91, Winter 2006.
  72. Huang, M., H., Seidmann, A., and E. T. G., Wang, Price Mechanism for Knowledge Transfer: An Integrative Theory" Journal of Management Information Systems (Winter 2007-2008) Vol. 24, No. 3, pp. 79-109.
  73. Ayal, M., and A. Seidmann, "An Empirical Investigation of the Value of Integrating Enterprise Information Systems: The Case of Medical Imaging Informatics," Journal of Management Information Systems, (Fall 2009) Vol. 26, No. 2, pp. 43-68.
  74. Pinker E., Seidmann A., and Vakrat, Y., "Using Bid Data for the Management of Sequential, Multi-unit, Online Auctions with Uniformly Distributed Bidders’ Valuations," European Journal of Operations Research, Vol., 202, pp. 574–583 (April 2010).
  75. Lahiri, A., and A. Seidmann, "Analyzing the Differing Impact of Radiology Information Systems (RIS) Across Radiology Modalities, " Journal of the American College of Radiology, Vol. 6, Issue 10, pp. 705-714, 2009.
  76. Zhang, J., and A. Seidmann, "Perpetual vs Subscription Licensing under Quality Uncertainty and Network Externality Effect," Journal of Management Information Systems Vol. 27, Issue 1, pp. 39-68, 2010.
  77. Cakici, E., Groenevelt, H., and A., Seidmann , "Using RFID for the Management of Pharmaceutical Inventory – System Optimization and Shrinkage Control," Decision Support Systems (to appear 2011)
  78. Marom, O., and A. Seidmann, "Using 'Last-Minute' Sales for Vertical Differentiation on the Internet," Decision Support Systems (to appear 2011)

Referred Books & Notes

  1. R. G. Wilhelm, S. Y. Nof and A. Seidmann, Analysis of Recirculation in Robotic Systems using Feedback Flow Models," in Robotics and Material Flow, S. Y. Nof (Ed .), Elsevier, NY (1986), pp. 69-82.
  2. A. Seidmann, S. Shalev-Oren and P. J. Schweitzer, "An Analytical Review of Several Computerized Closed Queueing Network Models of FMS," in Flexible Manufacturing Systems: Operations Research Models and Application, K. E. Stecke and R. Suri (Ed's), Elsevier, NY (1986), pp. 369- 380.
  3. A. Seidmann and A. Tenenbaum, "Optimal Stochastic Scheduling of Flexible Manufacturing Systems with Finite Buffers," in Flexible Manufacturing Systems: Operations Research Models and Applications, K. E. Stecke and R. Suri (Ed's), Elsevier, NY (1986), pp. 487-498.
  4. A. Arbel and A. Seidmann, "Performance Evaluation of Flexible Manufacturing Systems," in Flexible Manufacturing Systems: Current Issues and Models, F. Choobineh and R. Suri (Ed.),Industrial Engineering and Management Press, Atlanta, GA, (1986), pp. 118-129.
  5. A. Seidmann, "Operational Controls of AS/RS using AI Problem Solving Concepts," Recent Developments in Production Research , A. Mital (Ed.), Elsevier, NY, (1988), pp. 385-395.
  6. B. Gavish and A. Seidmann, "Printed Circuit Board Assembly Automation- Formulations and Algorithms," Recent Developments in Production Research , A. Mital (Ed.), Elsevier, NY, (1988), pp. 624-636.
  7. A. Seidmann, "Intelligent Information Models for Operating Automated Storage and Retrieval Systems (AS/RS)," Knowledge - Based Systems in Manufacturing," A. Kusiak, (Ed.), Taylor & Francis, (1989), pp. 305-330.
  8. A. Seidmann, "Knowledge Models for the Design and Management of Automated Storage and Retrieval Systems," "Advanced Information Technology for Industrial Material Flow," S. Y. Nof and C. L. Moodie (Ed's), Springer, Berlin. (1989), pp. 387-416.
  9. P. J. Schweitzer and A. Seidmann, "Processing Rate Optimization for FMS's with Distinct Multiple Job Visits to Work Centers," in Flexible Manufacturing Systems: Operations Research Models and Applications, K. E. Stecke and R. Suri (Eds.), Elsevier, NY, (1989), pp. 79-84.
  10. A. E. Gray, A. Seidmann, and K. E. Stecke, "Tool Management in Automated Manufacturing: A Tutorial," in Flexible Manufacturing Systems: Operations Research Models and Applications, K. E. Stecke and R. Suri (Eds.), pp. 93-98.
  11. A. Seidmann, and P. J. Schweitzer, "Performance Optimization for Flexible Manufacturing Systems," in Robotic Systems and AMT , G. Halevi, R. Weill, and I Yudelevich, (Ed.s), Elsevier, NY, (1990), pp. 219-225.
  12. J. Kim, and A. Seidmann, "Evaluating Throughput Rates of Automated Storage and Retrieval Systems (AS/RS)" in Robotic Systems and AMT, G. Halevi, R. Weill, and I Yudelevich, (Ed.s), Elsevier, NY, (1990), pp. 247-260.
  13. A. Seidmann, "Performance Management Issues in Flexible Manufacturing Systems: An Analytic Perspective," in Perspectives in Operations Management, R. K. Sarin (Ed. ), Kluwer, NY, (1993) pp. 301-320.
  14. N. D. Pearson and A. Seidmann, "Computerized Analytics for Bond Valuation," to appear in Information Technologies in Financial Markets: Managing Today' s Trading Platform, R. J. Kauffman, R. M. Mark, and B. W. Weber (Eds.), Irwin Publishing, (NY).
  15. A. Seidmann, and A. Sundararajan, "Sharing Logistics Information Across Organizations: Technology, Competition, and Contracting," in Future Markets: How Information Technology Shapes Competition , C. K. Kemerer (Ed.), Kluwer Academic Publishers, NY, (1997), pp.107-136.
  16. P. Nelson, W. Richmond, and A. Seidmann, "Software Acquisition: The Custom/Package and Insource/Outsource Dimensions," Advances in Computers San Diego CA. (1998), pp. 342-365.
  17. E. Brynjolfsson, and A. Seidmann, "A Call for Exploration: Introduction to Special Issue on Frontiers Research on Information Systems and Economics," Management Science, Vol.43, No. 12 (1997).
  18. J. Hazra, P.J. Schweitzer, and A. Seidmann, "Analysis of a Kanban - Controlled Assembly System," in Operations Management for Global Economy, Arun Kamda (editor), pp. 618-626, (2000).
  19. Gundepudi, N. Rudi, and A. Seidmann, "Forward and Spot Buying: Yield Management of Information Goods," in Stochastic Modeling and Optimization of Manufacturing Systems and Supply Chains, J. George Shanthikumar, David D. Yao, and W. Henk M. Zijm (ed's), Kluwer Academic Publishing, PP. 329- 373. (2003).
  20. A. Seidmann, F., J. Lexa, and T. Mehta, "Measuring the Capacity, Productivity, and Costs of Service of an MRI Center: The Service Activity Costing Approach," in Clinical Magnetic Resonance Imaging, (3rd Edition), R. Edelman, (Ed), Vol. 1, pp. 679-691, 2005.

Technical Reports and Professional Papers

  1. Techem Advanced Technology Inc., and A. Seidmann, "Design Guidelines for Management Information System," prepared for the Board of Bank Otzar Hahayal, Tel-Aviv, Israel (1974).
  2. A. Seidmann, "Wage Incentive for Bank Activities," prepared for the Board of Bank Otzar Hahayal, Tel-Aviv, Israel (1975).
  3. A. Seidmann, "Analysis of Advanced Real-time on Line Computer System for Stock Exchange Operations," prepared for the Board of Bank Otzar Hahayal, Tel- Aviv, Israel (1976).
  4. A. Seidmann and D. Bihovsky, "Design and Economical Evaluation of a Financial Data Base and E.D.P. Systems," prepared for the Board of Bank Otzar Hahayal, Tel-Aviv, Israel (1976).
  5. R. A. Dudek, C. Denardo and A. Seidmann, "Technology Assessment Model of Photo-Voltaic Concentrator Systems," prepared for the US Department of Energy (1979).
  6. M.L. Smith, A. Seidmann and J. Sherif, "An Economic Model of Solar Energy for Process Steam Generation," prepared for the Center for Energy Research, Texas Tech University (1979).
  7. M.L. Smith and A. Seidmann, "A Feasibility Study of a Solar System Producing Industrial Process Heat in the Textile Industry," prepared for the Center of Energy Research, Texas Tech University (1979).
  8. A.L. Stoecker and A. Seidmann, "Linear Dynamic Programming Methodology For Optimal Groundwater Mining," Technical Article, The Texas Agricultural Research Station, The Texas A & M University System, College Station, Texas, (1981).
  9. A.L. Stoecker, G.L. Lloyd and A. Seidmann, "A Dynamic Programming Analysis of Irrigation System Investments," Technical Article, The Texas Agricultural Research Station, The Texas A & M University System, College Station, TX, (1981).
  10. A. Seidmann, "Human Engineering Considerations in Developing Software Systems," Machashvim, (Computers), Vol. 2, No. 4, April (1983), pp. 70-72. (In Hebrew).
  11. D. Sipper and A. Seidmann, "Cost Estimation for R & D in Advanced Electronic Systems," Final Report, Submitted to Israel Aircraft Industries (ELTA) (1983).
  12. A. Seidmann, "Development of Software Systems," Masse Hoshev,(Israel Journal of Information Processing), Vol.10, No. 3, (1983), pp. 25-26. (In Hebrew).
  13. R. Shapira, and A. Seidmann, "A Technological & Economical Model for Evaluating Industrial Robots, Part I," Masse Hoshev (Israel Journal of Information Processing), Vol. 11, No. 1, (1984), pp.19-22. (In Hebrew).
  14. R. Shapira, and A. Seidmann, "A Technological & Economical Model for Evaluating Industrial Robots, Part II," Masse Hoshev (Israel Journal of Information Processing), Vol. 11, No. 2, (1984). pp.46-53. (In Hebrew).
  15. A. Seidmann, M. Goldwasser, Z. Yogev and A. Ronen, "Evaluating the Impact of Microelectronic Technologies on the Office Systems in Israel: The Case of Word Processing," National Council for Research and Development in Israel, Report NCRD (7/ 84), (1984).
  16. P. Schweitzer, A. Seidmann, and P.B. Goes,"Computerized Models for Performance Optimization in FMS," Technical Paper MM90-341, Society of Manufacturing Engineers, Dearborn Michigan.
  17. Seidmann, A., and E., Çakici, "Making Waves," TOMOGRAPHY, January 2008
  18. Çakici, E., Groenevelt, H., and A., Seidmann, " A Case Inquiry: Can RFID Help Reduce Costs in Medical Imaging?, Radiology Business Journal, April/May 2009

Proposals Submitted

  1. A. Seidmann and S.S. Panwalkar, "Application of Graph Theory to Plant Layout Problems," submitted to the Office of Research and Graduate Studies, Texas Tech University.
  2. D. Sipper and A. Seidmann, "Estimating R and D Costs in Advanced Electronic Systems," submitted to Israel Aircraft Industries.(Funded: $45,000).
  3. A. Seidmann and S. Globerson, "Analysis of Paced Industrial Learning," submitted to the R & D Office of Tel-Aviv University. (Funded: $5000).
  4. D. Sipper and A. Seidmann, "Mini Robots Research and Instruction," submitted to the Ministry of Commerce and Industry. (Funded: $8000).
  5. A. Seidmann, "Development of Advanced Industrial Engineering Methodologies," Submitted to the Ministry of Defense ($25,000).
  6. W.B. Richmond and A. Seidmann, "Comparative Advantage of External Versus Internal Information System Development." Submitted to ADAPSO USA ($270,000)
  7. Seidmann, “Analyzing the PACS Impact,” Submitted to KODAK (Funded 2006, at $45,000)
  8. A. Seidmann, “Analyzing the RIS Economics Impact,” Submitted to Carestream (Funded 2007, at $45,000)
  9. A. Seidmann, “Analyzing the Auto QA Economics Impact,” Submitted to Carestream (Funded 2009, at $40,000)
  10. D. Friedman, and A. Seidmann, “Using Telemedicine for the treatment of Headache Patients,” Submitted to Merck Pharmaceuticals (Funded 2011, $170,000)

Media Citations (Since 1994)

  1. Rochester Business Journal: "Downsizing's Dark Side," March 4, 1994.
  2. Democrat and Chronicle: "The New Work Order," March 6, 1994 .
  3. Democrat and Chronicle: "Xerox Subcontract May Be $4.1 Billion, Biggest Ever," March 22, 1994.
  4. Rochester Business Journal: "Linear Programming Hits Mainstream, "April 1, 1994.
  5. Democrat and Chronicle: "A Whole New Word," May 22, 1994.
  6. Democrat and Chronicle: "Information Management Outsourcing Deal Nearing Finalization," May 30, 1994.
  7. Rochester Business Magazine: "Riding the Wave of the Future/The Information Super Highway: Don't Be Left in the Dust," September 1994.
  8. Rochester Business Journal: "Special Report on Information Technology," February 10, 1995.
  9. Waters: The Wall Street's Technology Elite Magazine: "A Class Apart," Winter 1995, 52-58.
  10. Wall Street Journal: "The Business Bulletin," front page, April 20, 1995.
  11. Advanced Manufacturing Technology: "Computer Aided Factories Should Universalize Technology," May 15, 1995.
  12. Rochester Business Journal: "Health Care Group on Information Mission," May 19, 1995.
  13. Rochester Business Journal: "Of Machine and Men: Special Report on Information Technology," June 2, 1995.
  14. The Microcomputer Trainer: 'New Research Indicated that Computer-Ignorant CEO's Undermine their Companies' Competitive Position," March 1995.
  15. IIE Solutions: 'Computer-Integrated Manufacturing: An Opportunity Missed', August 1995.
  16. Manufacturing Engineering: 'CIM Succeeds when Top Managers Drive It', September 1996.
  17. Waters: 'Inside Financial-IT B-Schools', November 1996.
  18. Democrat and Chronicle: 'Bridging the Cultural Gap', February 1997.
  19. Computerworld: 'Is an MBA for You?', July 1997.
  20. WHAM, Radio, 'Winning a Research Prize', February 1998.
  21. Democrat and Chronicle, 'In the Community', March 4, 1998.
  22. USA Today, 'Technically, it's an addiction', April 21, 1998.
  23. Radio Station WSYR 570 News in Syracuse, 'The Growing Impact of Telecommunications on Work Design and Pressures', April 27, 1998.
  24. WORK TV-13: 6:00 pm newscast. Interviewed in a story on outsourcing in manufacturing.
  25. RNews TV-9: Station: Interviewed twice on political developments and US policy, December 1998.
  26. Wall Street Journal: "Online Auctions May Elicit Lower Prices for Shoppers than Online Catalogs," September 23, 1999.
  27. Rochester Business Journal: "Cited and photographed in a Special Report on Information Technology & E-Commerce" January 28, 2000.
  28. AACSB Newsline Journal, "Hurr - E up: B Schools Striving to Get E - Business Courses and Resources Up to Speed," Volume 30, Number 3, March 2000.
  29. MBA Bullet Point, "Xerox: Improving the Company's IQ," April 11-28, 2000.
  30. WROC (CBS) Channel 8, "The Simon Program in Electronic Commerce" April 2000.
  31. Democrat and Chronicle, "E-Commerce Changing MBA Curriculum " June 18, 2000.
  32. News TV-8, NBC: Station: Interviewed on local manufacturing and economics issues, October 2000.
  33. Democrat and Chronicle, "No goggles needed to use this flat - panel display,' January 28, 2001.
  34. Democrat and Chronicle, "Kodak targets health care for growth."
  35. Democrat and Chronicle, "New software to help doctors, insurers with records and more," February 14, 2005.
  36. WHAM Radio, "On Kodak’s Digital Printing," February 21, 2005.
  37. Rochester Business Journal, "Schools reputation reflects world-class faculty," Special Section, November 17, 2006.
  38. Rochester Business Journal, "Online Retailers post Growth, Focus on Customer Service," May 27, 2009.

Public Board Activities